|Product Name:||Fiber Optical Power Meter||Wavelength:||800-1700nm|
|Optical Connector:||Interchangeable SC/ST/FC||Display:||LCD:128*64|
|Power Source:||2-3 AA1.5V Battery||Work Time:||24h|
|Weight:||500g||Application:||Fiber Optic Cable Checker|
handheld optical power meter,
fiber optic splicing tools
CATV Power Meter,Optical Power Meter JW3208 Handheld Fiber Optical Power Meter
JW3208 self calibrating handheld optical power meter is a precise, durable and convenient portable test instrument specially designed for installation, operation and maintenance of optical fiber network. It has smart appearance, selectable switch's backlight display, automatic shutdown function, ultra wide optical power test range, precise test accuracy, new user self calibration function and general interface design.
This kind calibration type optical power meter is for handheld installation, operation and maintenance of optical fiber network special design of a precise, durable, convenient portable test instrument. With clever appearance, can choose to switch back light display, automatic shutdown function, super wide optical power test range, accurate testing accuracy and new users auto-calibration function and general interface design
PON power meter is a small size, low loss and good quality handed-held optical power meter. It is designed for the testing, installation and maintenance of FTTX PON network, which can be used for APON, BPON, EPON and GPON network. It has two output ports for ONU and OLT/Video, which supports CW/burst upstream detection at 1310nm and downstream signal at 1490/ 1550nm. It can directly show the status of pass, warning or failure by threshold testing. FHP2P01 is the ideal tool for PON setting and maintenance.
LCD display screen
LCD shows the measured optical power value in the form of dB, dBm, mW, uW and nW. The set wavelength is 850nm, 980nm, 1300nm, 1310nm, 1490nm, 1310nm, and the current working state of optical power meter.
According to the ON/OFF key to the liquid crystal display, you can start the JW3208, and at the same time in the boot state, press the key, you can turn off (after the start of 1 second clock).
At set wavelengths, the relative measurement of the value of the light power is carried out.
Press the key to make the self - zero of the light power meter.
The wavelength selection key can press different wavelengths to choose the 850nm, 980nm, 1300nm, 1310nm, 1490nm and 1550nm wavelengths. This value will also be displayed on LCD.
Press the key to open and close the backlight of the liquid crystal.
New user self calibration function
Service life of supernormal battery
Use the universal number 5 battery for up to 240 hours of continuous working time
Simultaneous display of linear (mW) and nonlinear (dBm) indexes
Unique universal interface design
FC/SC/ST and other interfaces are common, without complex conversion
Quick response without preheating
Optional automatic shutdown function
Backlight display of optional switch
Turn on / turn off
Hold down the ON/OFF key on the surface, and LCD shows that the boot is finished.
2. when the ON/OFF key on the panel is pressed, the LCD is not displayed, and the optical power meter is closed.
Absolute optical power measurement
1. open the light power meter.
Set the measurement wavelength. The wavelength is selected by the lambda bond. The default is set to 1310nm.
The access is measured, and the screen is displayed as the current measured value, including the linear and nonlinear values of absolute power.
Relative optical power measurement
Set the measurement wavelength.
2. in the absolute light power measurement mode, the measuring light is connected and the current power value is measured.
3. press the dB key, and the current optical power value is the current reference value (in dBm). At this time, the absolute power value is displayed and the relative optical power value is 0dB.
4. access another measuring light, showing the absolute light power and relative light power of the current measured light.
JW3208 has three mode of work, 1: factory mode, 2: user mode, 3: work mode, usually enter work mode.
The factory method is measured and corrected by the factory.
User modification mode
At the same time press the lambda +Light key, then enter the user mode, the upper right corner shows the number "1". If you press the lambda +Light button again, exit the user mode, enter the work mode, and display the number "0" in the upper right corner.
Remarks: if user calibration or deviation occurs, it can be restored to the factory status by "lambda" and "Zero" button in the "user modification" mode.
10 minutes automatic shutdown function: press LIGHT+dB, open / close the automatic shutdown function. When you open the automatic shutdown function, the upper right corner of the screen showing off the mark, 10 minutes without key press, automatic shutdown.
5.4.4, backlight opening / canceling function: in the working mode, press LIGHT to open / close the backlight. When the backlight is opened, a sign of a small sun is displayed on the right side of the screen, indicating that the backlight is in the open state.
Optical fiber CATV Engineering
Optical fiber communication engineering
Research on optical fiber sensing
Production and research of optical devices
Other optical fiber engineering
|1) Accepted small order,OEM,etc.|
|2) Ordinary delivery time: 3-7 days, according to order quantity.|
|3) Ready to shipping by sea ,DHL , Fedex, EMS, as soon as we receive payment|
|4) Accept T/T 100% advance. Western Union, PayPal.|
|5) Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility|
Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping are also optional.
Q5. How to proceed an order for the product?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Contact Person: Alice Cai
Tel: +86 13530265603