|PON Interface:||1 EPON Port||Wavelength:||Tx: 1310nm, Rx: 1490nm|
|Optical Interface:||SC/APC Connector||Pon Port:||Singlemode|
|Funcation:||Wifi, CATV, POTS||LAN Interface:||1 X 10/100/1000Mbps And 3 X 10/100Mbps Auto Adaptive Ethernet Interfaces|
|Power Supply:||DC 12V/1A||Net Weight:||0.35kg|
fiberhome epon onu,
1ge epon onu
1 G/EPON port(EPON PX20+ and GPON Class B+)
Receiving sensitivity: ≤-27dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
|Wavelength||Tx: 1310nm, Rx: 1490nm|
|Optical Interface||SC/APC Connector|
1 FXS, RJ11 connector
Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay
Line testing according to GR-909
|LAN Interface||1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector|
RF, optical power : +2~-18dBm
Optical reflection loss: ≥45dB
Optical receiving wavelength: 1550±10nm
RF frequency range: 47~1000MHz, RF output impedance: 75Ω
RF output level: 78dBuV
AGC range: 0~-15dBm
Compliant with IEEE802.11b/g/n,
Operating frequency: 2.400-2.4835GHz
support MIMO, rate up to 300Mbps,
2T2R,2 external antenna 5dBi,
Support: Multiple SSID
Modulation type: DSSS, CCK and OFDM
Encoding scheme: BPSK, QPSK, 16QAM and 64QAM
14, For Status of POWER, LOS, PON, SYS,LAN1~LAN4 ,WIFI, WPS,
Internet, FXS, Worn, Normal(CATV)
|Push-Button||3,For Function of Reset, WLAN, WPS|
|Power Supply||DC 12V/1A|
|On||The device is powered up.|
|Off||The device is powered down.|
|On||The device has registered to the PON system.|
|Blink||The device is registering the PON system.|
|Off||The device registration is incorrect.|
|Blink||The device doses not receive optical signals.|
|Off||The device has received optical signal.|
|On||The device system runs normally.|
|Off||The device system runs abnormally.|
|Blink||The device network connection is normal.|
|Off||The device network connection is abnormal.|
|On||The WIFI interface is up.|
|Blink||The WIFI interface is sending or/and receiving data (ACT).|
|Off||The WIFI interface is down.|
|On||Phone has registered to the SIP Server.|
|Blink||Phone has registered and data transmission (ACT).|
|Off||Phone registration is incorrect.|
|Blink||The WIFI interface is securely establishing a connection.|
|Off||The WIFI interface does not establish a secure connection.|
|On||Port (LANx) is connected properly (LINK).|
|Blink||Port (LANx) is sending or/and receiving data (ACT).|
|Off||Port (LANx) connection exception or not connected.|
|Worn (CATV)||On||Input optical power is higher than 3dbm or lower than -13dbm|
|Off||Input optical power is between -13dbm and 3dbm|
|Normal (CATV)||On||Input optical power is between -13dbm and 3dbm|
|Off||Input optical power is higher than 3dbm or lower than -13dbm|
Typical Solution:FTTO(Office), FTTB(Building),FTTH(Home)
Typical Business:INTERNET,IPTV,VOD,IP Camera,CATV , VoIP etc
Q1. Can I have a sample order for this product?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-6 days, mass production time needs 1-2 weeks for order quantity more than
Q3. Do you have any MOQ limit for sample order?
A: Low MOQ, 1pc for sample checking is available
Q4. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping are also optional.
Q5. How to proceed an order for the product?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Contact Person: Alice Cai
Tel: +86 13530265603